Quantification of rifampicin loaded into inhaled polymeric nanoparticles by reversed phase high-performance liquid chromatography in pulmonary nonphagocytic cellular uptake.

Rifampicin is an antibiotic effective against both Gram-negative and Gram-positive bacteria and is commonly used as a first-line treatment for tuberculosis caused by Mycobacterium tuberculosis. In this study, a reversed-phase high-performance liquid chromatography method was developed and validated to assess rifampicin, either free or combined with ascorbic acid, loaded into chitosan/Tween 80-coated alginate nanoparticles. The method utilized a reversed-phase C18 Restek column with specific chromatographic conditions: a mobile phase of 60 : 40 ratios of methanol/buffer phosphate (pH 7.0), at a flow rate of 0.8 mL min-1, and an injection volume of 15 µL. rifampicin and the internal standard (rifamycin) had retention times of 4.0 and 2.5 min, respectively, and were detected at 334 nm. The method demonstrated the stability of stored samples after freezing-thawing cycles and specificity for rifampicin, even in the presence of degradation products from stress conditions. The high-performance liquid chromatography method was found to be specific, precise, robust, and sensitive. Results indicated that rifampicin accumulation and uptake kinetics varied based on cell type, formulation (free or loaded in nanoparticles), rifampicin concentration, and incubation time. Confocal fluorescence microscopy images supported these findings, showing isothiocyanate fluorescein nanoparticles distribution in different intracellular regions depending on the cell type used. The societal impact of this research lies in its potential to advance the treatment of respiratory infectious diseases, such as tuberculosis, through the development of more effective and specific drug delivery methods. By optimizing the way drugs, particularly rifampicin in this case, interact with lung cells, we aim to achieve greater treatment efficacy and alleviate the overall burden of disease. Furthermore, our study offers novel insights into the intracellular behavior of rifampin from polymeric nanoparticles, paving the way for personalized medicine approaches in the treatment of respiratory infections. This dual focus on social impact and innovation underscores our commitment to improving global health outcomes and addressing pressing public health challenges.

High-resolution landscape of an antibiotic binding site.

Antibiotic binding sites are located in important domains of essential enzymes and have been extensively studied in the context of resistance mutations; however, their study is limited by positive selection. Using multiplex genome engineering1 to overcome this constraint, we generate and characterize a collection of 760 single-residue mutants encompassing the entire rifampicin binding site of Escherichia coli RNA polymerase (RNAP). By genetically mapping drug-enzyme interactions, we identify an alpha helix where mutations considerably enhance or disrupt rifampicin binding. We find mutations in this region that prolong antibiotic binding, converting rifampicin from a bacteriostatic to bactericidal drug by inducing lethal DNA breaks. The latter are replication dependent, indicating that rifampicin kills by causing detrimental transcription-replication conflicts at promoters. We also identify additional binding site mutations that greatly increase the speed of RNAP.Fast RNAP depletes the cell of nucleotides, alters cell sensitivity to different antibiotics and provides a cold growth advantage. Finally, by mapping natural rpoB sequence diversity, we discover that functional rifampicin binding site mutations that alter RNAP properties or confer drug resistance occur frequently in nature.

In vitro, in-vivo, and in-silico investigation of physicochemical interactions between pioglitazone and rifampicin.

There is a possibility of in-situ physicochemical interactions between concomitantly administered drugs. This study aimed to investigate such physicochemical interactions between pioglitazone and rifampicin. Pioglitazone exhibited significantly higher dissolution in the presence of rifampicin, while the dissolution of rifampicin remained unaffected. The solid-state characterization of precipitates recovered after pH-shift dissolution experiments revealed the conversion of pioglitazone into an amorphous form in the presence of rifampicin. The Density Function Theory (DFT) calculations showed the intermolecular hydrogen bonding between rifampicin and pioglitazone. In-situ conversion of pioglitazone in amorphous form and subsequent supersaturation of GIT milieu translated into significantly higher in-vivo exposure of pioglitazone and its metabolites (M-III and M-IV) in Wistar rats. Therefore, it is advisable to consider the possibility of physicochemical interactions between concomitantly administered drugs. Our findings may be beneficial in tailoring the dose of concomitantly administered drugs, particularly for chronic conditions that entail polypharmacy.

pH-responsive microparticles of rifampicin for augmented intramacrophage uptake and enhanced antitubercular efficacy.

In this study we present pH-responsive rifampicin (RIF) microparticles comprising lecithin and a biodegradable hydrophobic polymer, polyethylene sebacate (PES), to achieve high intramacrophage delivery and enhanced antitubercular efficacy. PES and PES-lecithin combination microparticles (PL MPs) prepared by single step precipitation revealed average size of 1.5 to 2.7 µm, entrapment efficiency âˆ¼ 60 %, drug loading 12-15 % and negative zeta potential. Increase in lecithin concentration enhanced hydrophilicity. PES MPs demonstrated faster release in simulated lung fluid pH 7.4, while lecithin MPs facilitated faster and concentration dependent release in acidic artificial lysosomal fluid (ALF) pH 4.5 due to swelling and destabilization confirmed by TEM. PES and PL (1:2) MPs exhibited comparable macrophage uptake which was âˆ¼ 5-fold superior than free RIF, in the RAW 264.7 macrophage cells. Confocal microscopy depicted intensified accumulation of the MPs in the lysosomal compartment, with augmented release of coumarin dye from the PL MPs, confirming pH-triggered increased intracellular release. Although, PES MPs and PL (1:2) MPs displayed comparable and high macrophage uptake, antitubercular efficacy against macrophage internalised M. tuberculosis was significantly higher with PL (1:2) MPs. This suggested great promise of the pH-sensitive PL (1:2) MPs for enhanced antitubercular efficacy.

In vitro Dissolution Testing of Rifampicin Powder Formulations For Prediction of Plasma Concentration-Time Profiles After Inhaled Delivery.

PURPOSE: The purpose of this study was to evaluate the in vitro lung dissolution of amorphous and crystalline powder formulations of rifampicin in polyethylene oxide (PEO) and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), and to predict the in vivo plasma concentration-time profiles using the in vitro data. METHODS: The in vitro dissolution and permeation profiles of respirable rifampicin particles were studied using a custom-made dissolution apparatus. Data from the in vitro dissolution test were used to estimate the parameters to be used as the input for the simulation of in vivo plasma concentration-time profiles using STELLA® software. For prediction of in vivo profiles, a one-compartment model either with a first order elimination or with a Michaelis-Menten kinetics-based elimination was used. RESULTS: Compared to the crystalline formulation, the amorphous formulation showed rapid in vitro dissolution suggesting their possible faster in vivo absorption and higher plasma concentrations of rifampicin following lung delivery. However, the simulations suggested that both powder formulations would result in similar plasma-concentration time profiles of rifampicin. CONCLUSIONS: Use of an in vitro dissolution test coupled with a simulation model for prediction of plasma-concentration time profiles of an inhaled drug was demonstrated in this work. These models can also be used in the design of inhaled formulations by controlling their release and dissolution properties to achieve desired lung retention or systemic absorption following delivery to the lungs.

Development and Optimization of a New UPLC-UV/MS Method through DoE and MLR for Detecting Substandard Drug Products to Treat Tuberculosis.

Drug products used for treating tuberculosis are one of the most widely reported medicines to be classified as falsified or substandard in low- and middle-income countries, representing a major hazard to health. The aim of this study was, firstly, to develop an ultra-performance liquid chromatography (UPLC) method which is able to analyze fixed combination tablets with up to four active pharmaceutical ingredients, including isoniazid, pyrazinamide, rifampicin, and ethambutol. Secondly, we aimed to optimize it through the design of experiments and multi-linear regression based on a central composite design and to validate it according to the guidelines of the International Conference on Harmonization. The application of this tools enabled the identification of the influential factors (flow rate, formic acid, and temperature) and their effects on the studied responses (retention factor and percentage for each drug) as part of the quality by design approach. The method proved to be to be linear in the range from 5.0 to 15 µg/mL for isoniazid, pyrazinamide, and rifampicin, being precise (<1%) and accurate (97−101%). In addition, the method validated for ethambutol proved to be linear from 1.4 to 4.2 µg/mL, as well as precise (0.54%) and accurate (97.3%). The method was stability indicated for all the active pharmaceutical ingredients studied and was able to detect two substandard formulations sampled on the African market.

One-pot synthesis of α-Linolenic acid nanoemulsion-templated drug-loaded silica mesocomposites as efficient bactericide against drug-resistant Mycobacterium tuberculosis.

Nowadays, pathogenic infection has posed a severe threat to the public health and environmental sanitation, urging a continuous search of efficacious and safe bactericidal agents of various formulated forms. Here, a facile one-pot hydrothermal preparation of mesoporous silica nanoparticles using ultrasonication-assisted nanoemulsion of α-Linolenic acid (α-LA) as template was developed. The formed silica mesocomposite at water/fatty-acid surface provides an easy yet green synthesis route, which can be generalized for the further encapsulation of hydrophobic drugs such as antimycobacterial Rifampicin (RIF). The obtained α-LA nanoemulsion-templated silica nanoparticles (LNS NPs), with a weight content of ∼17% α-LA in the composite, showed apparent antibacterial effect against Staphylococcus aureus (S. aureus). By comparison, the removal of α-LA from the silica nanoparticles (LNS-1 NPs) resulted in the composite of enlarged pore size with negligible bactericidal activities. Notably, the Isoniazide (INH) and Rifampicin (RIF)-encapsulated LNS NPs exhibited outstanding antimycobacterial activity against both drug-sensitive and drug-resistant Mycobacterium tuberculosis (M. tuberculosis). The obtained highly biocompatible, biosafe and low-energy consumptive α-LA-contained mesostructured silica-based bactericide holds promising therapeutic potentials to tackle the emerging drug-resistant infectious microbes.

Tuberculosis drug discovery: Progression and future interventions in the wake of emerging resistance.

The emergence of drug resistance continues to afflict TB control where drug resistant strains have become a global health concern. Contrary to drug-sensitive TB, the treatment of MDR/XDR-TB is more complicated requiring the administration of second-line drugs that are inefficient than the first line drugs and are associated with greater side effects. The emergence of drug resistant Mtb strains had coincided with an innovation void in the field of drug discovery of anti-mycobacterials. However, the approval of bedaquiline and delamanid recently for use in MDR/XDR-TB has given an impetus to the TB drug discovery. The review discusses the drug discovery efforts in the field of tuberculosis with a focus on the strategies adopted and challenges confronted by TB research community. Here, we discuss the diverse clinical candidates in the current TB drug discovery pipeline. There is an urgent need to combat the current TB menace through multidisciplinary approaches and strategies making use of the recent advances in understanding the molecular biology and pathogenesis of Mtb. The review highlights the recent advances in drug discovery, with the host directed therapeutics and nanoparticles-drug delivery coming up as important tools to fight tuberculosis in the future.

Cascade-Targeting Poly(amino acid) Nanoparticles Eliminate Intracellular Bacteria via On-Site Antibiotic Delivery.

Intracellular bacteria in latent or dormant states tolerate high-dose antibiotics. Fighting against these opportunistic bacteria has been a long-standing challenge. Herein, the design of a cascade-targeting drug delivery system (DDS) that can sequentially target macrophages and intracellular bacteria, exhibiting on-site drug delivery, is reported. The DDS is fabricated by encapsulating rifampicin (Rif) into mannose-decorated poly(α-N-acryloyl-phenylalanine)-block-poly(ß-N-acryloyl-d-aminoalanine) nanoparticles, denoted as Rif@FAM NPs. The mannose units on Rif@FAM NPs guide the initial macrophage-specific uptake and intracellular accumulation. After the uptake, the detachment of mannose in acidic phagolysosome via Schiff base cleavage exposes the d-aminoalanine moieties, which subsequently steer the NPs to escape from lysosomes and target intracellular bacteria through peptidoglycan-specific binding, as evidenced by the in situ/ex situ co-localization using confocal, flow cytometry, and transmission electron microscopy. Through the on-site Rif delivery, Rif@FAM NPs show superior in vitro and in vivo elimination efficiency than the control groups of free Rif or the DDSs lacking the macrophages- or bacteria-targeting moieties. Furthermore, Rif@FAM NPs remodel the innate immune response of the infected macrophages by upregulating M1/M2 polarization, resulting in a reinforced antibacterial capacity. Therefore, this biocompatible DDS enabling macrophages and bacteria targeting in a cascade manner provides a new outlook for the therapy of intracellular pathogen infection.

Intracellular Accumulation of Novel and Clinically Used TB Drugs Potentiates Intracellular Synergy.

The therapeutic repertoire for tuberculosis (TB) remains limited despite the existence of many TB drugs that are highly active in in vitro models and possess clinical utility. Underlying the lack of efficacy in vivo is the inability of TB drugs to penetrate microenvironments inhabited by the causative agent, Mycobacterium tuberculosis, including host alveolar macrophages. Here, we determined the ability of the phenoxazine PhX1 previously shown to be active against M. tuberculosis in vitro to differentially penetrate murine compartments, including plasma, epithelial lining fluid, and isolated epithelial lining fluid cells. We also investigated the extent of permeation into uninfected and M. tuberculosis-infected human macrophage-like Tamm-Horsfall protein 1 (THP-1) cells directly and by comparing to results obtained in vitro in synergy assays. Our data indicate that PhX1 (4,750 ± 127.2 ng/ml) penetrates more effectively into THP-1 cells than do the clinically used anti-TB agents, rifampin (3,050 ± 62.9 ng/ml), moxifloxacin (3,374 ± 48.7 ng/ml), bedaquiline (4,410 ± 190.9 ng/ml), and linezolid (770 ± 14.1 ng/ml). Compound efficacy in infected cells correlated with intracellular accumulation, reinforcing the perceived importance of intracellular penetration as a key drug property. Moreover, we detected synergies deriving from redox-stimulatory combinations of PhX1 or clofazimine with the novel prenylated amino-artemisinin WHN296. Finally, we used compound synergies to elucidate the relationship between compound intracellular accumulation and efficacy, with PhX1/WHN296 synergy levels shown to predict drug efficacy. Collectively, our data support the utility of the applied assays in identifying in vitro active compounds with the potential for clinical development. IMPORTANCE This study addresses the development of novel therapeutic compounds for the eventual treatment of drug-resistant tuberculosis. Tuberculosis continues to progress, with cases of Mycobacterium tuberculosis (M. tuberculosis) resistance to first-line medications increasing. We assess new combinations of drugs with both oxidant and redox properties coupled with a third partner drug, with the focus here being on the potentiation of M. tuberculosis-active combinations of compounds in the intracellular macrophage environment. Thus, we determined the ability of the phenoxazine PhX1, previously shown to be active against M. tuberculosis in vitro, to differentially penetrate murine compartments, including plasma, epithelial lining fluid, and isolated epithelial lining fluid cells. In addition, the extent of permeation into human macrophage-like THP-1 cells and H37Rv-infected THP-1 cells was measured via mass spectrometry and compared to in vitro two-dimensional synergy and subsequent intracellular efficacy. Collectively, our data indicate that development of new drugs will be facilitated using the methods described herein.

Instant hydrogelation encapsulates drugs onto implants intraoperatively against osteoarticular tuberculosis.

Osteoarticular Tuberculosis (TB) is a challenging issue because of its chronicity and recurrence. Many drug delivery systems (DDSs) have been developed for general chemotherapy. Herein, we take advantage of instant hydrogelation to in situ encapsulate drugs onto implants intraoperatively, optimizing the drug release profile against osteoarticular TB. First-line chemodrugs, i.e. rifampicin (RFP) and isoniazid (INH) are firstly loaded on tricalcium phosphate (TCP). Then, the encapsulating hydrogel is fabricated by dipping in chitosan (CS) and ß-glycerophosphate (ß-GP) solution and heating at 80 °C for 40 min. The hydrogel encapsulation inhibits explosive drug release initially, but maintains long-term drug release (INH, 158 days; RFP, 53 days) in vitro. Therefore, this technique could inhibit bone destruction and inflammation from TB effectively in vivo, better than our previous ex situ prepared DDSs. The encapsulating technology, i.e. instant hydrogelation of drug-loaded implants, shows potential for regulating the type and ratio of drugs, elastic and viscous modulus of the hydrogel according to the state of illness intraoperatively for optimal drug release.

Porous particles and novel carrier particles with enhanced penetration for efficient pulmonary delivery of antitubercular drugs.

This study aimed to design dry powder inhaler formulations using a hydrophilic polymeric polysaccharide, phytoglycogen (PyG), as a multi-functional additive that increases the phagocytic activity of macrophage-like cells and enhances pulmonary delivery of drugs. The safety and usefulness of PyG were determined using in vitro cell-based studies. Dry powder inhaler formulations of an antitubercular drug, rifampicin, were fabricated by spray drying with PyG. The cytotoxicity, effects on phagocytosis, particle size, and morphology were evaluated. The aerosolization properties of the powder formulations were evaluated using an Andersen cascade impactor (ACI). Scanning electron microscope images of the particles on each ACI stage were captured to observe the deposition behavior. PyG showed no toxicity in A549, Calu-3, or RAW264.7 cell lines. At concentrations of 0.5 and 1 g/L, PyG facilitated the cellular uptake of latex beads and the expression of pro-inflammatory cytokine genes in RAW264.7 cells. Formulations with outstanding inhalation potential were produced. The fine particle fraction (aerodynamic size 2-7 µm) of the porous particle batch reached nearly 60%, whereas in the formulation containing wrinkled carrier particles, the extra-fine particle fraction (aerodynamic particle size < 2 µm) was 25.0% ± 1.7%. The deposition of porous and wrinkled particles on individual ACI stages was distinct. The inclusion of PyG dramatically improved the inhalation performance of porous and wrinkled powder formulations. These easily inhaled immunostimulatory carrier particles may advance the state of research by enhancing the therapeutic effect and alveolar delivery of antitubercular drugs.

In Situ Biosynthesis of a Metal Nanoparticle Encapsulated in Alginate Gel for Imageable Drug-Delivery System.

Development of drug-delivery systems that allow simultaneous in vivo imaging has gained much interest. We report a novel strategy to encapsulate metal nanoparticles (NPs) within alginate gel for in vivo imaging. The cell lysate of recombinant Escherichia coli strain, expressing Arabidopsis thaliana phytochelatin synthase and Pseudomonas putida metallothionein genes, was encapsulated within the alginate gel. Incubation of alginate gel with metal ion precursors followed by UV irradiation resulted in the synthesis of high concentrations of metal NPs, such as Au, Ag, CdSe, and EuSe NPs, within the gel. The alginate gel with metal NPs was used as a drug-delivery system by further co-encapsulating doxorubicin and rifampicin, the release of which was made to be pH-dependent. This system can be conveniently and safely used for in vitro and in vivo bioimaging, enabled by the metal NPs formed within the gel matrix without using toxic reducing reagents or surfactants.

Ultrasound Triggered Drug Release from Affinity-Based ß-Cyclodextrin Polymers for Infection Control.

This work demonstrates a slow, sustained drug delivery system that provides on-demand delivery bursts through the application of pulsed therapeutic ultrasound (TUS). Insoluble ß-cyclodextrin-polymer (pCD) disks were loaded with a saturated antibiotic solution of rifampicin (RIF) and used for drug delivery studies. To obtain on-demand release from the implants, TUS was applied at an intensity of 1.8 W/cm2. The therapeutic efficacy of the combination treatment was assessed in bacterial culture via an in vitro Staphylococcus aureus bioluminescence assay. The results demonstrated that the application of pulsed TUS at 3 MHz and 1.8 W/cm2 to pCD implants leads to a significantly higher short-term burst in the drug release rate compared to samples not treated with TUS. The addition of TUS increased the drug release by 100% within 4 days. The pCD disk + RIF stimulated with TUS showed a comparatively higher bacterial eradication with CFU/mL of 4.277E+09, and 8.00E+08 at 1 and 24 h compared with control treated bacteria at 1.48E+10. Overall, these results suggest that the addition of pulsed TUS could be an effective technology to noninvasively expedite antibiotic release on demand at desired intervals.

Designing Out PXR Activity on Drug Discovery Projects: A Review of Structure-Based Methods, Empirical and Computational Approaches.

This perspective discusses the role of pregnane xenobiotic receptor (PXR) in drug discovery and the impact of its activation on CYP3A4 induction. The use of structural biology to reduce PXR activity on drug discovery projects has become more common in recent years. Analysis of this work highlights several important molecular interactions, and the resultant structural modifications to reduce PXR activity are summarized. The computational approaches undertaken to support the design of new drugs devoid of PXR activation potential are also discussed. Finally, the SAR of empirical design strategies to reduce PXR activity is reviewed, and the key SAR transformations are discussed and summarized. In conclusion, this perspective demonstrates that PXR activity can be greatly diminished or negated on active drug discovery projects with the knowledge now available. This perspective should be useful to anyone who seeks to reduce PXR activity on a drug discovery project.

Mannose-conjugated chitosan nanoparticles for delivery of Rifampicin to Osteoarticular tuberculosis.

Tuberculosis (TB) is a potentially fatal contagious disease and is a second leading infectious cause of death in the world. Osteoarticular TB is treated using standard regimen of 1st and 2nd line anti-tubercular drugs (ATDs) for extensive period of 8-20 months. These drugs are commonly administered in high doses by oral route or by intravenous route, because of their compromised bioavailability. The common drawbacks associated with conventional therapy are poor patient compliance due to long treatment period, frequent and high dosing, and toxicity. This aspect marks for the need of formulations to eliminate these drawbacks. MTB is an intracellular pathogen of mononuclear phagocyte. This attribute makes nanotherapeutics an ideal approach for MTB treatment as macrophages capture nano forms. Polymeric nanoparticles are removed from the body by opsonization and phagocytosis, which forms an ideal strategy to target macrophage containing mycobacteria. To further improve targetability, the nanoparticles are conjugated with ligand, which serves as an easy substrate for the receptors present on the macrophage surface. The purpose of present work was to develop intra-articular injectable in situ gelling system containing polymeric nanoparticles, which would have promising advantages over conventional method of treatment. The rationale behind formulating nanoparticle incorporated in situ gel-based system was to ensure localization of the formulation in intra-articular cavity along with sustained release and conjugation of nanoparticles with mannose as ligand to improve uptake by macrophages. Rifampicin standard ATD was formulated into chitosan nanoparticles. Chitosan with 85% degree of deacetylation (DDA) and sodium tripolyphosphate (TPP) as the crosslinking agent was used for preparing nanoparticles. The percent entrapment was found to be about 71%. The prepared nanoparticles were conjugated with mannose. Conjugation of ligand was ascertained by performing Fourier transformed infrared spectroscopy. The particle size was found to be in the range of 130-140 nm and zeta potential of 38.5 mV. Additionally, we performed scanning electron microscopy to characterize the surface morphology of ligand-conjugated nanoparticles. The conjugated chitosan nanoparticles were incorporated into in situ gelling system comprising Poloxamer 407 and HPMC K4M. The gelling system was evaluated for viscosity, gelling characteristics, and syringeability. The drug release from conjugated nanoparticles incorporated in in situ gel was found to be about 70.3% at the end of 40 h in simulated synovial fluid following zero-order release kinetics. Based on the initial encouraging results obtained, the nanoparticles are being envisaged for ex vivo cellular uptake study using TB-infected macrophages.

Chol-Dex nanomicelles: Synthesis, characterization and evaluation as efficient drug carriers for colon targeting.

Core-shell structures obtained from amphiphilic molecules on self-assembly in a medium have emerged as an important tool in the area of biomedical sciences. Here, we have synthesized cholesteryl-dextran (Chol-Dex) amphiphiles in sufficiently high yields via conjugation of cholesteryl hemisuccinate to dextran in two different concentrations (5 and 10%). After physicochemical and spectral analysis, the nanomicelles were subjected to size measurements. DLS and TEM confirmed the formation of core-shell type of nanomicelles. Hydrophobic drug-entrapped formulations (Metronidazole and Rifampicin) displayed sustained release behaviour of drugs from them. Sustained release at neutral pH demonstrated usefulness of the non-toxic delivery system for colon specific diseases.

A Dual-Responsive Antibiotic-Loaded Nanoparticle Specifically Binds Pathogens and Overcomes Antimicrobial-Resistant Infections.

Antimicrobial resistant (AMR) infections are a growing threat to public health and there is a general lack of development in new antibiotics. Here, a dextran-coated stimuli-responsive nanoparticle (NP) that encapsulates the hydrophobic antibiotic, rifampicin, and specifically binds bacteria to overcome AMR infections is reported. The NP shows a strong affinity with a variety of pathogens in vitro and effectively accumulates in the bacterial infected tissues. The NP is activated by either low pH or high reactive oxygen species in the infectious microenvironment, and releases both cationic polymer and rifampicin that display synergistic activity against AMR pathogens. The NP carrier also enables the antibiotic to penetrate both bacterial biofilms and mammalian cells, thus allowing the elimination of biofilm and intracellular infections. The NP formulation demonstrates both safety and efficacy in two animal infection models against either Gram-negative or Gram-positive AMR pathogens.

Discovery of a highly potent novel rifampicin analog by preparing a hybrid of the precursors of the antibiotic drugs rifampicin and clofazimine.

Tuberculosis (TB) is an infectious disease caused by the bacillus Mycobacterium tuberculosis (Mtb). The present work reports the design and synthesis of a hybrid of the precursors of rifampicin and clofazimine, which led to the discovery of a novel Rifaphenazine (RPZ) molecule with potent anti-TB activity. In addition, the efficacy of RPZ was evaluated in-vitro using the reference strain Mtb H37Rv. Herein, 2,3 diamino phenazine, a precursor of an anti-TB drug clofazimine, was tethered to the rifampicin core. This 2,3 diamino phenazine did not have an inherent anti-TB activity even at a concentration of up to 2 µg/mL, while rifampicin did not exhibit any activity against Mtb at a concentration of 0.1 µg/mL. However, the synthesized novel Rifaphenzine (RPZ) inhibited 78% of the Mtb colonies at a drug concentration of 0.1 µg/mL, while 93% of the bacterial colonies were killed at 0.5 µg/mL of the drug. Furthermore, the Minimum Inhibitory Concentration (MIC) value for RPZ was 1 µg/mL. Time-kill studies revealed that all bacterial colonies were killed within a period of 24 h. The synthesized novel molecule was characterized using high-resolution mass spectroscopy and NMR spectroscopy. Cytotoxicity studies (IC50) were performed on human monocytic cell line THP-1, and the determined IC50 value was 96 µg/mL, which is non-cytotoxic.

The Introduction of Hydrazone, Hydrazide, or Azepane Moieties to the Triterpenoid Core Enhances an Activity Against M. tuberculosis.

BACKGROUND: Triterpenoids exhibit a wide spectrum of antimicrobial activity. OBJECTIVE: The objective of this study was to synthesize a series of nitrogen derivatives based on lupane, oleanane, and ursane triterpenoids with high antitubercular activity. METHODS: Isonicotinoylhydrazones were prepared via the reaction of 3-oxotriterpenic acids or betulonic aldehyde with isoniazid (INH) in yields of 54-72%. N-Acylation of betulonic or azepanobetulinic acids led to lupane C28 hydrazides and dihydrazides. The derivatives were evaluated for their in vitro antimycobacterial activities against Mycobacterium tuberculosis (MTB) H37RV and single-drug resistance (SDR)-TB in the National Institute of Allergy and Infectious Diseases, USA. Molecular docking was performed to evaluate the possible binding modes of investigated compounds in the active site of Diterpene synthase (Rv3378c). RESULTS: The obtained compounds are represented by C3 or C28 conjugates with hydrazine hydrate or INH. Some compounds demonstrated from high minimum inhibitory concentration (MIC ≤ 10 µg/mL) to excellent (MICs from 0.19 to 1.25 µg/mL) activity against MTB H37RV. Two lupane conjugates with INH were the leading compounds against MTB H37RV and some SDR-strains with MICs ranged from 0.19 to 1.70 µg/mL. Molecular docking of active compounds to diterpene synthase showed that these moieties accommodate the active site of the enzyme. CONCLUSION: It was revealed that the conjugation of lupanes with INH at C3 is more effective than at C28 and the lupane skeleton is preferable among oleanane and ursane types. The replacement of native hexacarbocyclic A ring to seven-member azepane ring is favorably for inhibition of both MTB H37RV and SDR-strains. These data could possibly mean that the antitubercular activity against INH-resistant strains (INH-R) came from both triterpenoid and isoniazid parts of the hybrid molecules. Azepanobetulin showed the highest activity against both INH-R strains in comparison with other triterpenoids and INH. Thus, the introduction of hydrazone, hydrazide (dihydrazide), or azepane moieties into the triterpenoid core is a promising way for the development of new anti-tubercular agents.